20190905
I began to thickness the top as the tedious rosette process was done.
With my large kanna plane, I thicknessed the top and it leave a gleam on the top when seen under light.
As the top was being thicknessed, I also take note of the mass and the frequency response as well as the flex on the top.
When the readings reach my desired range, I stop the thicknessing and it was ready for the next stage.
Thicknessing the top with my kanna
Another view
Look at the shavings
Tapping the top
Analyse the frequency
Final mass of the top is 133g in line with my other tops of similar density
No comments:
Post a Comment