Shaping the heel

20150907
Before I assemble the gutiar I have to shape the heel properly.
I cut the side curve using my saw and chisel away the rest.
Then I began to shape the secondary bevels
After gluing the heel to the neck, I began to shape the heel more.
It would be harder to shape it after the guitar is assembled.

Saw away the sides of the heel from the front.
I use a sliding bevel to make sure the 2 angles are the same.

Chisel the waste away

Glue the heel to neck.

Clamp the heel to the neck

Shaping the heel.

The heel now is a sharp heel.
I probably round it off to become a bullet shape.
Just wanted to try this shape for now.

Final heel shaped and sanded nicely.