but I just couldn't resist it so I took out the top and saw the outline.
I leave about 5mm of border from the plantilla line.
Cutting the top was much easier as the top was softer than the back.
I had a better fret saw and that certainly does make a difference.
The fret saw grip the blade more tightly and I didn't manage to break any blade this time round.
Here are the pictures.
I also measure the thickness using my caliper and it was about 2.8 mm throughout.
That was close to the final thickness.
I had better start to inlay the rosette and carry on my work.
Hopefully by the end of the year I should be done.
No comments:
Post a Comment